10,000 WATT GENERATOR

Additional generator sizes

GENERATOR - 10,000 WATT

10,000 Watts
333 lbs.
20 HP Electric Start Honda Engine
7 Receptacles
Fully Protected Circuit Breakers
Brushless Design Alternator
Auto Idle Control on 20 & 30 Amp Outlets
Hour Meter
Pneumatic 12" Wheels & Handle

 access owner's manual 

CUTOFF SAW

• High Power-to-weight ratio
• No Load Rpm: 5000;15 Amp
• Two Position Wrap Around Side Handle
• 115 V Ac/Dc
• 4.7 HP
• 1" Arbor
• 12" Blade capacity

  access owner's manual
  

ROAD SAW

STURDI SAW CONCRETE ROAD SAW

Rugged, one-piece constructed frame
3-belt arbor drive
1-1/4" alloy steel arbor shaft
18" capacity hinged, bolt-on blade guard with Laminar flow water system
Large 8" rear and 4" front wheels with zerk fittings
Foldable handle
Height: 37" Width: 24" Length: 42"
13 HP Honda OHV w/Cyclone Air Filter

POWER CUT SAW

64cc 2-cycle engine
Quick position guard setting
Easy adjusting belt tensioning
Computerized ignition system with variable timing allowance
Recoil starter and decompression valve
5-stage filtration system:initial -3 foam layers (color-coded pore size);main -paper cartridge;final -robkoflok element
Engine speed 9,500 rpm

TROWELING MACHINE

TROWEL MACHINE, 36 INCH 4 BLADE

Exclusive Dyna-Clutch® stops blade rotation but not the engine
Locking T-handle with variable speed throttle control
Adjustable body contoured handle
Lifting eye -standard
Blade leveler adjustment
Shipped assembled with combination blades
Two year warranty on gear case

Blades - 4
Diameter - 36
Blade RPM - 50-130
Propitch - Yes

access owner's manual

MORTAR MIXER 6 CUBIC FT

1-1/2 to 3 bag capacity
Towable high speed wheels
Fully enclosed engine cowling
Bearings and seals carry unconditional lifetime warranty
Belt-driven
Pintle hitch standard,ball hitch optional
Steel paddles,rubber blades
Quick-pierce bag splitter

HP -8.0 OHV
Batch Cap. Bags- 1 1/2 - 2
Batch Cap.- 6
Total Volume- 6.9

Material Lift 24’

maximum height (forks down) 22'1"
height (stowed) 86"
length (stowed) 34"
base-width 31-1/4"
net weight 389lbs.
load capacity
14" load center 650lbs.
with fork extensions 200lbs.

WOLFPAC ASPHALT ROLLER

WOLFPAC ASPHALT ROLLER

1 1/2 Ton, vibratory
18 hp Honda Twin gas powered
features centerpoint articulation,double drum drive, internal vibration and a short wheelbase to make quick work of finish layers of driveways, parking lots, bicycle paths and a wide variety of other surfaces.

12 1/2 TON HYDRAULIC BOTTLE JACK

HYDRAULIC BOTTLE JACK

Electrically welded base and cylinders to assure strength and eliminate leaks
Common release valve assemblies and other interchangeable parts for quick repair are standard
Carrying handle
Rated Capacity 12 1/2 Ton
Closed Height 6 3/4

BRUTE BREAKER HAMMER

BRUTE BREAKER HAMMER KIT

Operates on 115 V AC/DC (15 amp wall outlet or 2,500 watt portable generator)
Accepts 1-1/8" hex air tool steel with retaining collar or Bosch internal locking combo steel
ServiceMinder brush system shuts the Brute off when brush replacement, lubrication or preventative maintenance is needed
Grease packed gear box and hammer mechanism
Shock mounted handles absorb vibration to reduce operator fatigue
1400 no load BPM

access owner's manual

DEMOLITION HAMMER

Features SDS-max™ drive system for fast steel changes
Vario-lock for 12-way chisel positioning
13.6 amp
900-1,890 BPM

access owner's manual

TOWABLE BOOM LIFT 34'

TOWABLE BOOM LIFT 34' -JLG

Hydraulic auto-leveling outriggers for faster and easier set up
Industry leading 65 mph rated towing speed
24V DC electric or gas powered engine
Platform controls with one-hand operation of boom functions
Accessory mounting tray accommodates customer-provided generator, air compressor or pressure washer
Standard air and water lines to the platform

SCISSOR LIFT 19'

ELECTRIC SCISSOR LIFT - JLG

Long battery duty cycles for hours of operation in multi-shift conditions.
Smooth controls combined with fast lift and drive speeds provide improved productivity for the operator

SCAFFOLDING

Interchangeable and compatible with Biljax® Scaffolding
#6 - 1-5/8" OD Tubing Requires 1-3/8" Accessories
Prices Include: Coupling Pin Att. w/ Rivet & Cotter & "C" Locks For Sure Brace Locking

ALL PURPOSE TOWER KIT

Unit with walkboard
With narrow outriggers
Guard rail set included
Working heights: 2 ft. to 11 1/2 ft.

GRINDER 7 INCH

Max power 3.0 HP; 15.0 amp; 6,000 RPM
Epocy Coated Field for long service life
Spindle lock provides quick wheel changes
Lock on/off switch
5/8" - 11 spindle for popular accessories
Vibration Control in side and main handle reduces vibration up to 60%
Indludes 7" guard, flange, nut & wrench

AIR COMPRESSOR

Splash Lubricated Pump
Ball Bearing Crankshaft
Oil Level Sight Gauge
Oversize Flywheel
Automotive Style Bearing Inserts
Filter/Regulator included
Runs approximately 7-10 Framing/Sheathing Guns
or 9-12 Roofing Guns
Power 8.0 HP Honda
CFM @ 100 PSI 19.2
RPM 900
Tank Size (gal) 9

CORE DRILL MACHINE

CORE DRILL MACHINE 8-IN MAX

Ideal for drilling holes up to 8" in diameter
The 2-1/2" square column is precision-machined allowing the carriage to slide accurately and smoothly which is crucial for a perfect core
14" x 19" cast aluminum base; 4 leveling screws; slot for vacuum attachment; 5" wheels
2-1/2" square, 42" long column; gear track welded to column
Recommended Bit Sizes: Low 5"-8", High 2-1/2"-5"
Shown with optional Vacuum Assembly

access owner's manual

STUD/JOIST DRILL 1/2-IN

100% ball-bearing construction provides durability and longer tool life
Mechanical-slip clutch in low gear to prevent bit lock-up
Adjustable front handle and 2-position side handle
Mechanically controlled 2-speed
Triple gear reduction provides increased torque and reduces gear stress
Includes: chuck key with holder, bail handle and heavy-duty kit box

LASER LEVEL

SELF LEVELING LASER

Range 2000 Feet
Interior/Exterior use
1/16" accuracy at 100'
Horizontal/Vertical leveling
Anti-Drift system
Battery level indicators
No bubble required
Pro-Grade motorized electronic self-leveling
Heavy duty glass
Includes tripod, rod and vertical mount

BANDSAW PORTABLE

Powerful Motor at 6 Amps - Enough power for any jobsite application
Large Front Handle - Offers the user plenty of hand space for a more accurate cut
Sight Light - Allows the user to see and cut in dark jobsite environment
Dual Bearing Blade Guides - Offers increased durability in the blade support system
4-3/4" Cutting Capacity - Deep cut capacity allows the user to cut 4-3/4" round or rectangular stock
Durable Adjustable Material Stop - Allows aluminum castings to withstand jobsite abuse without damage
Hang Hook - Allows the user to hang saw on pipe stand without damaging front handle or castings
Superior Balance and Ergonomics - Lightweight at 15 lbs. with soft grip handle for superior ergonomics
Rubber Bumper - Allows aluminum castings to withstand jobsite abuse without damage
Includes Carrying Case, hex wrench, and 44-7/8 x 1/2 x .020 blade